Proszę wybrać rozmiar systemu :

• Compensating swing clamp

  Difference equalisation, optionally with spindle, quick-release cylinder or short boring spindle

  

• Performance screw clamp

  For horizontal, vertical and diagonal clamping, optionally with spindle, quick-release cylinder or short spindle

  

• Compensating clamping arm with short boring spindle

  For heavy workpieces, use in conjunction with multi-clamping and support tower

  

• Multi-clamping and support tower

  For heavy work pieces, used in combination with compensating clamping arm with short boring spindle

  

• Screw clamp 180°

  With adjustable, sturdy round tube, optionally with spindle, quick-release cylinder or short spindle

  

• Variable screw clamp 90°

  Pressure direction 90° to the system bore, rotating quick-acting swivel,

  

• Variable screw clamp 45°

  Optimum action of force, optionally with spindle, quick-release cylinder or short spindle

  

• Variable screw clamp 45° with quick-action clamping cylinder

  

• Spindle with bushing and clamping pads

  High-quality 2-component plastic handle, long threaded spindle, clamping pad exchangeable

  

• Quick-action clamping cylinder with clamping pads

  Controlled, fast and vibration-proof clamping, clamping pad exchangeable

  

• Short boring spindle with bushing and clamping pads

  Highly recommended for confined spaces, clamping pad exchangeable

  

• Clamping pad with V-block

  No slipping and tipping with the self-centring clamping with V-block

  

• Plunger and contact piece

  With cross prism for clamping round / rectangular tubes, also as support in any system bore

  

• Plunger and contact piece with taper

  With 90° taper to clamp tubes on the interior diameter Ø10 - Ø58 mm, with pendulum compensation

  

• Clamping pad blackened steel doubleside

  Double-sided application, with cross prism for clamping round / rectangular tubes

  

• Adjusting spindle

  For adjusting a continuous support, clamping in hard to reach positions

  

• Clamping pad with ball form

  Especially for clamping corner profiles, clamping pad compensates angle errors

  

• Clamping pad blank

  For customer-specific adaptation, locations for DEMMELER system screw clamps already included

  

• Reduction plate

  Interface between system D28 and D16 or system D28 and D22

  

• 2P clamping bridge with 2 clamping pad, steel

  Two clamping points simultaneously, clamping uneven surfaces or 2 different heights

  

• VARIO stop ring for round screw clamp tubes

  For height fixation of screw clamps, included in the scope of delivery for all round tube screw clamps

  

• Clamping tube

  Precision clamping tube to fit the respective system bore, e.g. for compensating screw clamps

  

• Angle bushing 90°

  Can be used as corner stop, axis distance 50 mm

  

• Angle bushing 45°

  

• Angle bushing 90° with precision scaling

  User-friendly 360° precision scaling, especially handy in combination with toggle clamps

  

• Angle bushing 45° with precision scaling

  User-friendly 360° precision scaling, especially handy in combination with toggle clamps

  

• Adapter-tube

  Extension of support and clamping points, adaptable with screw clamp tube

  

• Extension sleeve

  As connecting piece between two clamping tubes or between screw clamp and clamping tube

  

• Ball clamp bushing with countersunk head

  High-quality stainless steel pressure piston, self-locking in any position with O-ring

  

• Reduction Bushing D16 to D28 / D16 to D22

  Used to hold Ø 16 mm screw clamps in D28 or D22 system bores