Skip to main content
Fenster schließen

Contact

DEMMELER Maschinenbau GmbH & Co. KG

Alpenstraße 10
87751 Heimertingen
Germany

Tel: +49 (0) 8335 / 9859-0
Fax: +49 (0) 8335 / 9859-27
info@demmeler.com
www.demmeler.com

Kontakt

Product details

  • For fast, easy and safe transportation of all heavy system components (e.g. worktable)
  • Fixing using 2 PC-bolts (D16-06001-000)
  • Transport ring must always be attached with at least 2x PC-bolts
  • Max. tightening torque D16: 20 Nm (Bolts are not included in the scope of delivery of the transport ring)
  • Max. payload: 0,7 t (vertical); 0,5 t (diagonal pull)
  • Countersunk head bolts may not be used!
  • Transport ring may only be used for DEMMELER 3D systems!
  • Internal operating instructions must be observed!
  • Only undamaged Transport ring and PC-bolts may be used!
  • The transport ring must be fixed centrally on the worktop. If two transport rings are used, these must be fixed symmetrically in the middle of the worktop. The maximum diagonal pulling angle must not exceed 45° (see warning notes).
  • The general regulations for means of transport have to be observed when using the transport ring!
  • Depending on the application, the load capacity may be significantly reduced.
  • Loads may not be applied to the transport ring in the ring plane! 
    Do not exceed the load capacity!
  • Do not allow personnel to stand underneath suspended loads.
  • Observe the warning notes on the transport ring!

System choose :

System :