- For fast, easy and safe transportation of all heavy system components (e.g. worktable)
- Attachment with 2x PPC bolts / PC-bolts (D28-06001-000; D28-06025-000)
- Transport ring must be attached with at least 2x PPC / PC-bolts!
- Max. tightening torque D28: 70 Nm (Bolts are not included in the scope of delivery of the transport ring)
- Max. payload: 1,8 t (vertical); 1,2 t (diagonal pull)
- Countersunk head bolts may not be used!
- Transport ring may only be used for DEMMELER 3D systems!
- Internal operating instructions must be observed!
- Only undamaged Transport ring and PPC / PC-bolts may be used!
- The transport ring must be fastened centrally on the worktop. When using two transport rings, these must be fastened centrally and symmetrically on the worktop. The maximum diagonal pull may not exceed 45° here (see warnings)
- The general regulations for means of transport have to be observed when using the transport ring!
- Depending on the application, the load capacity may be significantly reduced.
- Loads may only be applied to the transport ring in the ring plane! Do not exceed the load capacity!
- Do not allow personnel to stand underneath suspended lots.
- Observe the warnings on the transport ring!
price on request
|A in mm||200|
|B in mm||120|
|C in mm||129|