Quantity

Article no.

Article designation

8

PE28-03001-000

Clamping and locating angle 175x175x50 mm (bore / oblong hole)

4

D28-03001-005

Clamping and locating angle / small 175x75x50 mm, scale on both sides

1

PL28-03002-000

Clamping and locating angle, right 300x275 mm

1

PL28-03002-001

Clamping and locating angle, left 300x275 mm

1

PL28-03003-000

Clamping and locating angle, right 600x375 mm

1

PL28-03003-001

Clamping and locating angle, left 600x375 mm

1

PL28-03004-000

Clamping and locating angle, right 800x375 mm

1

PL28-03004-001

Clamping and locating angle, left 800x375 mm

1

D28-03007-000

Universal pivot and tilt angle aluminium-titanium, right (0-225°), 475x100x100 mm

4

PE28-03008-000

Clamping and locating angle 275x175x50 mm

8

D28-05001-000

Universal stop / large 225x50x25 mm

2

D28-05003-000

Stop-strip L 500 - 500x100x25 mm

2

D28-05003-001

Stop-strip L 800 - 800x100x25 mm

2

D28-05003-008

Stop-strip L 1000 - 1000x100x25 mm

2

D28-05006-000

Multi-clamping and support tower Ø 55 mm - height 1000 mm

2

D28-05007-000

Compensating clamping arm with short boring spindle - location Ø 55 mm, 20 kN clamping force, AF 14

4

D28-05009-000

Universal stop L 300 - 300x50x25 mm

2

D28-05013-000

Locating disk Ø 75 - stop dimension 25-50 mm, continuous

2

D28-05013-001

Locating disk Ø 100 - stop dimension 25-75 mm, continuous

4

D28-05015-000

Displacement stop - 150x50x25 mm, scale on both sides

36

D28-06025-000

PPC-bolts / short - Ø 28-0.02, AF 14, full surface support for optimum force transmission

4

D28-06026-000

PPC-bolts / long - Ø 28-0.02, AF 14, full surface support for optimum force transmission

16

D28-06009-000

Stop and positioning bolt Ø 28 / 40x74 mm

2

D28-07001-000

Compensating swing clamp 150 mm with spindle

4

D28-07002-000

Compensating swing clamp 200 mm with spindle

4

D28-07005-000

Screw clamp 180° with spindle - vertical tube 220 mm

4

D28-07005-014

Screw clamp 180° with spindle - vertical tube 350 mm

4

D28-07005-015

Screw clamp 180° with quick-action clamping cylinder - vertical tube 350 mm

4

D28-07005-033

Screw clamp 180° with spindle - vertical tube 500 mm

4

D28-07008-000

Swing clamp 90° - vertical tube 260 mm

4

D28-07009-000

Swing clamp 45° with adjusting screw - vertical tube 220 mm

4

D28-07009-011

Swing clamp 45° with adjusting screw - vertical tube 350 mm

2

D28-07018-000

2P. clamping bridge with 2 ball pins and 2 steel clamping pads - Ø 170x35x35 mm

4

D28-09001-000

Spacer set 11 pieces - Ø 50x125 mm, height compensation 5-100 mm - increment 1 mm

4

D28-09001-005

Spacer set with thread - Ø 50x125 mm, height compensation 22-105 mm, continuous

8

D28-09003-000

V-block locations blackened steel, Ø 58 mm - 130° - for tubes up to Ø 70 mm

1

D28-10002-000

Round brush Ø 28x260 mm, with protective cap, for cleaning the system bores

1

D00-10005-000

Pump bottle with 1-litre Öko anti-spatter spray

1

D00-10007-000

Bench stone 200x50x25 mm, 2-sided, for maintaining the system surfaces

1

D28-10008-000

Ball end hex wrench AF 14x150 mm

1

D00-10009-000

Ground connector D16/D28 - for cable 50-70 mm², load up to 500 A

1

D00-10016-001

Extraction tool - 250x40 mm, AF 14

1

D28-11001-000

Accessory cart - WxDxH = 1000x650x1010 mm, 4 casters