Contact
DEMMELER Maschinenbau GmbH & Co. KG
Alpenstraße 10
87751 Heimertingen
Germany
Tel: +49 (0) 8335 / 9859-0
Fax: +49 (0) 8335 / 9859-27
info@demmeler.com
www.demmeler.com
DEMMELER 3D welding tables – the optimum solution for many tasks!
The universal 3D welding table meets all requirements for horizontal as well as vertical applications. With this modular system, setting up your parts exactly and quickly is a snap: Machine housings, racks, frames, cross members, mounting brackets, railings, stairs, gates, control cabinets, sheet metal coverings and much more. Elaborate and costly conventional fixtures are a thing of the past. With this system, you can set and fix the specified sizes for any work piece quickly and precisely. Your individual welded components are clamped at the corresponding faces or points during the tacking and welding process for optimum positioning.
3D worktables
Please choose your system size :
The optimum 3D welding table for every application –
The intelligent system grids boost productivity

D28 / For everyday, large welded constructions
- Grid 50 x 50 mm
- 3-hole drilling pattern in the table side plates, 50 mm grid in the top and bottom rows with additional 100 mm grid in the middle
- Diagonal grid 100 × 100 mm
- 3-hole drilling pattern in the table side plates, 50 mm grid in the top and bottom rows with additional 100 mm grid in the middle

PROFIEcoLINE (PE)
- Grid 100 x 100 mm
- 3-hole drilling pattern in the table side plates, 50 mm grid in the top row with additional 100 mm grid in the middle and bottom rows
- Grid 100 x 100 mm
- Worktop approx. 25 mm high
with system bores
in a 100 mm x 100 mm grid
D22 / For light and medium-duty applications
- Grid 50 x 50 mm
- 3-row bore pattern on the table side plates, 50 x 50 mm diagonal grid
D16 / For delicate applications
- Diagonal grid 50 × 50 mm
- 3-row bore pattern on the table side plates, 50 mm grid in the top, middle and bottom row
- Grid 50 x 50 mm
- 3-row bore pattern on the table side plates, 50 mm grid in the top, middle and bottom row
Benefits of the DEMMELER welding tables
With our 3D clamping system, you have the right solution for clamping and positioning work pieces near at hand. Optimum positioning of the work piece not only makes work more accurate but also much more effective. In particular, the intelligent system grids give you unlimited clamping capabilities.
The hardness of DEMMELER – for the toughest requirements

Less wear
Protection against adherence of weld spatter
Extremely tough and durable
Optimum surface qualities
DEMONT 860 M
Using a high-alloy base material for the worktop in combination with the special, optimised Demmelerhardening process results in the best possible material characteristics. A hardness of up to 860 Vickers can be achieved. The combination of a high-alloy base material and special hardening process makes it possible to achieve the best possible worktable properties for extreme demands.
DEMONT 760 M
Stands for the combination of the specified base material and the new Demmeler hardening process optimised especially for worktables. This results in outstanding material characteristics. A hardness of up to 760 Vickers can be achieved, reducing wear for an even longer service life of your worktable.
DEMONT 860 M | DEMONT 760 M | SOLID | ||
Load | high bearing loads | ∆ ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ ∆ |
Evenness | for outstanding tool quality | ∆ ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ ∆ |
Conductivity | for excellent welding results when using the ground connector | ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ ∆ |
Base hardness | for high impact resistance | ∆ ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ | ∆ ∆ ∆ |
Surface hardness | resistant to weld spatter | ∆ ∆ ∆ ∆ ∆ | ∆ ∆ ∆ ∆ | ∆ ∆ ∆ |
∆ ∆ ∆ ∆ ∆ = outstanding
∆ = adequate
The right leg for any application
Foot sleeve prevents pinching the welding hose and protects the threaded spindle against dirt.
Pivoting foot with sturdy M30x2 (system D28) or M24x2 (system D16) threaded spindle, adjustment travel 30 mm fine adjustable.
