Aller au contenu principal
Fenster schließen


DEMMELER Maschinenbau GmbH & Co. KG

Alpenstraße 10
87751 Heimertingen

Tel: +49 (0) 8335 / 9859-0
Fax: +49 (0) 8335 / 9859-27

HobbyLINE (H) board 28

  • HobbyLINE (H) board 28
  • HobbyLINE (H) board 28
  • HobbyLINE (H) board 28
  • HobbyLINE (H) board 28
  • HobbyLINE (H) board 28
  • HobbyLINE (H) board 28

Product description

  • Cost-effective alternative for low loads
  • Worktop approx. 25 mm high with D28 system bores
    in a 100 mm x 100 mm grid
  • Accessories for E (EcoLINE), D (PlusLINE) and P (PremiumLINE)
    can be used on the worktop
  • M8 threaded bores on all four sides of the worktop
    including 8 outer stops with knurled screw
  • All system bores with new protective countersink,
    perfect design and ultimate functionality
  • Optimised outside table edges
  • Continuous gridlines in X and Y-direction, 100 mm spacing
price on request

plus VAT

Table size:
Point rating DEMONT 860 M DEMONT 760 M Standard
Hardness 10 8 5
Point load 9 8 5
Scratch-resistant 10 8 5
Corrosion-resistance 8 8 4
Against weld spatter 9 9 7
Accuracy 7 8 10
Service life 10 8 6
70 Points Maximum 63 Points 57 Points 42 Points

Your table leg:

Standard leg

Standard leg

Telescoping leg

Telescoping leg

Heavy-duty wheel

Heavy-duty wheel

Anchoring leg

Anchoring leg

Tischplatte ohne Fuß

Table top without leg


Item number table: H28-01001-000
Item number table leg:
Amount: 4 pieces

Technical data

L in mm 1000
W in mm 1000
H in mm 25
weight in kg 180
Your table leg Special leg
hardness Standard

Benefits of the DEMMELER welding tables

Max. load

All our welding tables are generously sized, super sturdy and optimised with FEM calculations on principle.

Precision scaling

Axis designation in x and y-direction. Standard version includes precision scaling.

Protective countersinks

Optimum bolt and clamp insertion with simultaneous protection of the tabletop against damage from materials, even in case of extreme strain on the system bore or when used with aluminium. 

Additional bores

Additional bores in the side stanchion for even more clamping options.

Leg with sleeve

The foot sleeve prevents pinching and reduces wear at the cable-hose assembly. This also provides a convenient way of using the ground connector. It also protects the threaded spindle against dirt and wear. Fine adjustments are possible and fixing is stable and simple.

Fitting accessories

Do you have questions?

You wish for individually tailored advice, or you have enquires to our products and services – please do not hesitate to contact us.

We are glad to be here for you!

Contact Form

All fields marked with * are mandatory fields.